The RS230 CV
buffer is an electronically active version of the RS170
Multiple. However, unlike the RS170, you should not attempt to use the
RS230 to combine the outputs from multiple source modules. It will not
act as a mixer.
The RS230 measures and
maintains the voltages applied at its two inputs so that, even if you
use all eight outputs, or even chain multiple RS230s, the voltages
are not adversely affected as the patch becomes more complex. Each of
the module's two banks can be used to distribute a single output from a
source to as many as four inputs on other modules. If you patch the
banks together, a single output can be directed to as many as seven
Each bank offers a single signal input. You may present a signal or CV in
the range ±10V for distribution to other modules.
Each bank offers three outputs that precisely distribute the input voltage
with its existing polarity.
Each bank offers one output
that precisely distributes the input voltage with opposite polarity.