RS Integrator Systems

Our Integrator systems can be ordered in any configuration. We have listed samples below to give an idea of the types of systems we build as standard. We will supply anything from empty cases to the mighty Phoenix System. All of our systems include leads and manual.

 Minisystem

900

RS10 containing RS20, RS40, RS60, RS85, RS95E, RS110, RS180.
 
System 1
1540
RS15 case containing RS20,  2x RS95E, 100, 110, 180x2, 60x2, 85, 40, 160 (CV Mixer), 165 (Signal Mixer), 230, 170

 Read Review

view large image

System 3
1640
RS15 case containing RS140, 380, 20, 95E, 95E, 280, 165, 110, 120, 170, 160, 60, 60, 180
System 3a
1900
The Apprentice case containing RS140, 380, 20, 95, 95, 280, 165, 110, 120, 170, 160, 60, 60, 180
   
RS200 sequencer
765
RS10 case containing RS200, 280, 150

 Read Review

view large image

   
RS8000
P.O.A.
Walnut cabinet containing RS20, 35, 40, 50, 3x 60, 70, 2x 85, 3x 95e, 100, 110, 120, 130, 2x 160, 165, 170, 3x 180, 215, 230, 250, 270, 280

 

Read Review

view large image

Front of the RS 8000

Back of the RS 8000

view large image


Radioheads Johnny Greenwood using a system 8000 and rs200 sequencer

   
RS8500
P.O.A.
System shown is a custom 8500 and is shown as a guide only.
Please call for current configuration.
 

view large image

 Back To Top

RS8500
P.O.A.
System shown is a custom 8500 and is shown as a guide only.
Please call for current configuration.
  view large image
   
Double Sequencer Cabinet
1825
Optional extra for RS8500. Walnut cabinet containing 2x RS200, 2x 150, 260, 280
   
Modular Filter Bank
700

RS10 case containing RS80, 3x RS110, RS160, RS170

view large image

The Apprentice

550


Picture courtesy of Sound On Sound Magazine

The Apprentice.
A Sorceror minus keyboard, midi interface and joystick.
168hp of module space in a walnut cabinet compete with power supply and Doepfer link board. When fitted with optional RS140 midi/c.v. modules makes a superb stand alone unit for Integrator, Concussor and Doepfer modules or as a slave to the Sorceror using its c.v./gate and midi outputs to feed the Apprentice.

Read Review

 Back To Top

Silverback Range
Spawn System

NO LONGER AVAILAVLE

 
Spawn preliminary details 6/8/2002
Click below for manual


Spawn is a 2U high rack mount synthesiser with the same MIDI/CV controller as featured on the best selling Sorceror and demon keyboards. Although the synthesiser is pre patched for ease of use there are no less than 37 sockets running below the synthesiser panel for enormous flexibility and true modular routing. The front panel boasts 23 knobs and 4 switches. 
The system features a fully functional VCO with V.C. wave shaping, sync, std, -2 octave switching and wide mode as well as a sub OSC with -1 and -2 octave outputs available simultaneously for a full rich sound, and a analogue glide function for portamento in addition to the MIDI generated glide. A fully featured modulation VCA allows for LFO routing to the VCO and VCF to take full advantage of the MIDI controllers, VC LFO with 4 wave forms all with outputs, powerful 24db Moog type lowpass filter, fully featured envelope generator with auto and gated repeat modes, noise generator, VCA with log and lin response and of course the lower patch bay with its ins and outs and attenuators to unlock the true power of spawn and any connected synthesiser like its support module named Pod.
Spawn responds to MIDI note on/off, velocity, aftertouch, mod wheel, breath and expression controllers as well as portamento these are available on sockets for routing throughout the system as well as other analogue synths the user may have making it a true MIDI/CV converter as a bonus. In addition there is a switching system to route 2 of the most commonly used controllers internally so you just take spawn out of the box and connect to a MIDI device and with no patch cords inserted the musician is ready to play classic analogue synthesiser tones. The midi routing switch routes mod wheel controller to the MIDI-CV mod VCA and expression to the VCF without the need for patching. Spawn responds to single and multiple triggering via a front panel switch.
Spawn should be available by mid September and will cost 495.00.
 
view large image
FB3 Filter Bank
340

19" self contained multimode filter with LFO

Read Review

   
Pheonix
£ Custom Made
Ask for Specifications